DEBUG HEADER : This is a cached page ! Winch Assist / Contactor Pack | Piranha Offroad 4WD Products

Winch Assist / Contactor Pack

PIRWCP

$300.00
Incl. GST

Winch Contactor Pack - Premium

Have you noticed solenoids in winches don’t seem to last as long as they used to?

Perhaps we are getting older but it is true we sell more solenoids then ever before. Maybe more winches are out there. A contactor pack is a great upgrade replacement for solenoids that have died.

It offers a reduced size and higher Amp capacity. Low resistance, resulting in higher current flow to the winch motor. It is easy to mount in the bullbar or under the bonnet, as it is much smaller than a conventional solenoid pack.

Downloads

PIRWCPB

$150.00
Incl. GST

Winch Contactor Pack - Budget

A contactor pack is a great replacement for solenoids that have died.

Comes with full wiring diagram.

 

DBWAKL

$129.00
Incl. GST

Dual Battery Jump Start / Winch Assist Kit - Long

Get that extra power from your Aux battery system when you need it most with just a turn of a key.

Start your car with a flat main battery.
Provide your winch with that extra power to get you out of that huge boghole.

Long kit suitable for vehicles with batteries on opposite sides of the engine bay.

(Piranha recommend the Red Key Switch be mounted as close as possible to the main battery & cable to be run along the firewall)

Kit Includes the following:

  • 4 metres of 25mm² (3B&S) pre-terminated with lugs for Red Key Switch.
  • Mounting bracket for Red Key Switch (MKRKW).
  • 2 x 25-8 Copper Lugs & Heatshrink.
  • Mounting hardware.

Please Note: crimping tool required to complete installation.

DBWAKS

$90.00
Incl. GST

Dual Battery Jump Start / Winch Assist Kit - Short

Get that extra power from your Aux battery system when you need it most with just a turn of a key.

Start your car with a flat main battery.
Provide your winch with that extra power to get you out of that huge boghole.

(Piranha recommend the Red Key Switch be mounted as close as possible to the main battery)

Kit Includes the following:

  • 1.5 metres of 25mm² (3B&S) pre-terminated with lugs for Red Key Switch.
  • Mounting bracket for Red Key Switch (MKRKW).
  • 2 x 25-8 Copper Lugs & Heatshrink.
  • Mounting hardware.

Please Note: crimping tool required to complete installation.