REDARC Smart Start Load Disconnect Isolator - SBI12-LLD

REDARC Smart Start Load Disconnect Isolator - SBI12-LLD. A microprocessor-controlled Load Disconnect Isolator designed for use in lithium battery applications (LiFePO4) as a system to protect the battery from being excessively discharged by auxiliary loads, enabling the auxiliary battery to remain above the level at which internal protection circuitry would activate. Falling below this threshold would prevent many chargers from recharging the battery. Once the auxiliary battery has been overly discharged, the Load Disconnect Isolator will turn off any connected loads. Similarly, if the battery climbs back above a suitable level, the Load Disconnect Isolator will restore power to the connected loads. Incorporates a number of spike protection components specifically designed to reduce the risk of damaging the unit. It is also designed to prevent any spikes generated by the solenoid coil from affecting vehicle equipment. For installation of smart battery isolators, use of quality fuse kits is recommended.

Features:

• Overmould design.
• Compact in size and easy to install.
• Silver contacts for longer life and suitable for marine applications.
• Power saving technology.
• Fault indication.
• Fully surge protected.
• 2 year warranty.

Specifications:

• Max. Inrush current: 400A.
• Max. Continuous current: 100A.
• Turn on voltage: 11V.
• Turn off voltage: 10.5V.
• Turn on delay: 10 seconds.
• Turn off delay: 2 seconds.
• Standby current: <5mA.
• Operating Current <0.1A.
• System voltage: 12V.
• Output voltage: 12V DC.
• Input fuse rating: 100A.
• Output fuse rating: 100A.

Dimensions:

• Height (mm): 70
• Width (mm): 75
• Depth/Length (mm): 80
• Weight (g): 200