REDARC 20A Ignition Control Under Bonnet DC Battery Charger - BCDC1220-IGN
REDARC 20A Ignition Control Under Bonnet DC Battery Charger - BCDC1220-IGN. A 12 Volt 20 Amp DC DC charger designed to fully charge a lead acid auxiliary battery, suitable for vehicles fitted with an ECU-controlled variable voltage alternator. Fully potted against heat, water, dust and vibration. Lower voltage setting so it can continue to operate with a low input voltage from the alternator. BCDC is a dual battery charger will work with a wide operating range (9 – 32V) giving the option of charging from both 12V and 24V vehicle systems. A unique charging profile for each specific battery type can maintain optimal charge in auxiliary batteries while driving, including charge in an auxiliary battery that is a different characteristic to the start battery. Should the voltage get too low, the unit will act as a dual battery isolator for protecting the start battery.
Features:
- Compact in size, easy to install and fully sealed. Able to withstand the harshest environments and for marine applications.
- Designed, built and tested in Australia.
- Multi stage DC to DC battery charger.
- Start battery isolator.
- No fan for super quiet operation.
- Charges AGM, Gel, Calcium content, VRLA and Standard Lead Acid batteries.
- Works with variable voltage alternators.
- 2 year warranty.
Specifications:
- Power Type: DC to DC.
- Nominal output power: 149W (12V vehicle)/294W (24V vehicle).
- Input fuse rating: 17A to 23A (not supplied).
- Suitable For 12V systems: Yes.
- Suitable For 24V systems: Yes.
- MPPT solar regulator: No.
- Cabin/canopy install: Yes.
- No load current: <100mA.
- Trailer install: Yes.
- Engine bay install: Yes.
- Max. charging voltage: 15.3V.
- Output fuse rating: 32A (not supplied).
- Operating temperature: -20°C to 80°C.
- Output voltage: 12V DC.
- Max. rated output current: 11A (12V vehicle)/20A (24V vehicle).
- Input voltage: 9 - 32V.
- Standby current: <5mA.
- Connector type: Bare wire.
Dimensions:
- Height (mm): 37
- Width (mm): 120
- Depth/Length (mm): 100
- Weight (g): 450
REDARC 20A Ignition Control Under Bonnet DC Battery Charger - BCDC1220-IGN
REDARC 20A Ignition Control Under Bonnet DC Battery Charger - BCDC1220-IGN. A 12 Volt 20 Amp DC DC charger designed to fully charge a lead acid auxiliary battery, suitable for vehicles fitted with an ECU-controlled variable voltage alternator. Fully potted against heat, water, dust and vibration. Lower voltage setting so it can continue to operate with a low input voltage from the alternator. BCDC is a dual battery charger will work with a wide operating range (9 – 32V) giving the option of charging from both 12V and 24V vehicle systems. A unique charging profile for each specific battery type can maintain optimal charge in auxiliary batteries while driving, including charge in an auxiliary battery that is a different characteristic to the start battery. Should the voltage get too low, the unit will act as a dual battery isolator for protecting the start battery.
Features:
- Compact in size, easy to install and fully sealed. Able to withstand the harshest environments and for marine applications.
- Designed, built and tested in Australia.
- Multi stage DC to DC battery charger.
- Start battery isolator.
- No fan for super quiet operation.
- Charges AGM, Gel, Calcium content, VRLA and Standard Lead Acid batteries.
- Works with variable voltage alternators.
- 2 year warranty.
Specifications:
- Power Type: DC to DC.
- Nominal output power: 149W (12V vehicle)/294W (24V vehicle).
- Input fuse rating: 17A to 23A (not supplied).
- Suitable For 12V systems: Yes.
- Suitable For 24V systems: Yes.
- MPPT solar regulator: No.
- Cabin/canopy install: Yes.
- No load current: <100mA.
- Trailer install: Yes.
- Engine bay install: Yes.
- Max. charging voltage: 15.3V.
- Output fuse rating: 32A (not supplied).
- Operating temperature: -20°C to 80°C.
- Output voltage: 12V DC.
- Max. rated output current: 11A (12V vehicle)/20A (24V vehicle).
- Input voltage: 9 - 32V.
- Standby current: <5mA.
- Connector type: Bare wire.
Dimensions:
- Height (mm): 37
- Width (mm): 120
- Depth/Length (mm): 100
- Weight (g): 450